Installation instructions
11 Installation of Accessories
Connecting Solar Panel
To charge the LPS with solar panels, perform the following steps:
You need a solar charge controller with Maximum Power
Point Tracking (MPPT) and an output voltage (DC) of 14.5 V ...
15 V.
You have mounted the red Anderson plug.
1.
Connect the solar controller with the red Anderson plug.
2.
Connect the solar charge controller to the photovoltaic cells.
For the installation of the solar charge controller, follow the notes
and instructions in the device manual.
3.
Insert the red Anderson plug into the DC output (12 V).
4.
Activate the DC output (12 V) via the menu of the LPS (see page 18).
The solar panel is connected.
Connecting Fuel Cells
To charge the LPS using alternative charging sources (fuel cells), perform the
following steps:
You have mounted the red Anderson plug.
1.
Connect the fuel cell with the red Anderson plug.
For the installation of the fuel cell, follow the notes and instructions
in the device manual.
2.
Insert the red Anderson plug into the DC output (12 V).
3.
Activate the DC output (12 V) via the menu of the LPS (see page 18).
The fuel cell is connected.
Page 13 of 25
Installation of Accessories