LEAB LPS Series User Manual page 20

Installation instructions
Deactivate/Activate Shutdown Delay (12 V, DC)
With the shutdown delay you have the option to delay the deactivation of the
DC output until after switching off the LPS.
To activate or deactivate the shutdown delay, perform the following steps:
The device is switched on.
1. Press the OK button to access the menu.
2. Select the menu item '12VDC Output' by pressing the arrow buttons
(up/down) and confirm selection by pressing the OK button.
3. Select the menu item 'Shutdown Delay' by pressing the arrow buttons
(up/down) and confirm the selection by pressing the OK button.
4. To activate the shutdown delay, select a time of 1 min ... 10 h by pressing
the arrow buttons (up/down) and confirm the selection by pressing the
OK button.
5. To deactivate the shutdown delay, press the lower arrow button until
'inactive' is displayed and confirm the selection with the OK button.
6. To exit the menu, press the left arrow button twice.
The shutdown delay is activated or deactivated.
Switch Off LPS
To switch off LPS, perform the following steps:
1. Press the On/Off button.

An On/Off menu opens.
2. Press the OK button to confirm the 'Shutdown' menu item and switch off
the LPS.
The LPS cannot be completely switched off when charging is taking
place at the AC input (230 V) or DC input (12 V).
The LPS is switched off.
Page 19 of 25
Operation