Sinclair SCC-36 User Manual page 26

Centralized Controller
(7) Customer Service
User can set the name and phone number of the local customer service
center for the convenience of acquiring immediate solutions and technical
support.
Press the
(8) View Selecting
Press the "View Selecting" button, User can select
"VRF&CAC&Split"、"VRF Unit View" and "CAC&Split View". Press the
button to save the setting. Main Page keep the selected view style.
(9) Restore default settings
Press the "Reset" button to restore local setting, e-Control setting, group
setting, schedule setting, names and icons of indoor units, and other relevant
ex-factory default settings.
1) When switching between indoor network and outdoor network, or reset
unit IP, restore the ex-factory setting for centralized controller.
2) After debugging for the centralized controller is finished, connect in to the
network. If connect the centralized controller to the network during
debugging process, it needs to restore the defaulted ex-factory setting.
5.6
About
On the home page, press
Press the "About" button to switch to about page. The operation method is the
same with that of the local setting.
On the page of about, user can view the information of the local unit, customer
service information and other notices.
button to save the setting.
to enter into setting page.