Sinclair SCC-36 User Manual page 25

Press the "Local Setting" button to switch to the setting options of the current
unit.
Select the needed option at the left side column. Sliding up and down can turn
over the page.
Set the corresponding content at the right side.
Local setting includes:
(1) Sound, temperature unit, time format, mutual exclusion
Press the button to select one kind of setting.
(2) Language
Press the button can select system language,such as English , Simplified
Chinese ,Traditional Chinese,Spanish ,French ,Portuguese ,German ,
Turkish.
(3) Time setting
Set the date and time of the centralized controller system, can also set the
VRF unit time if needed and Set the date and time of daylight saving time
(DST).
(4) User password
Press the button can activate or inactivate user password.
When password is activated, it can be set or changed in 4~10 numbers or
characters. Original password is blank.
Press the button
Note: I If user password is activated, user needs to input password to enter
the control page when centralized controller is turned on or activated.
(5) Backlight setting
Pressing this button can set the timeout period of screen backlight. Screen
will be shut off and the centralized controller will enter sleep mode when the
timeout period is over.
Note:When centralized controller is in sleep mode, use can wake it up by
touching any part of the touch screen or the touch button at the right bottom
of the screen..
(6) Brightness
Pressing or dragging the sliding bar can adjust the backlight degree.
to save the password.
Centralized Controller