Sinclair SCC-36 User Manual page 19

(1) Open the schedule
Press the zone button to open or close the schedule.
When the icons and texts turn bule indicating the schedule is open.
When the icons and texts turn grey indicating the schedule is closed.
When schedule is open, centralized controller will send out the control order
automatically according to the time and parameters set by the schedule.
(2) Edit schedule
Press to enter the page of schedule editing.
Press to enter the page of schedule editing.
1) Setting method of schedule control parameters is the same with that of
the single indoor unit control.
2) Add equipment
Press the "Add Unit" button to enter the page of equipment selection. User
may set the indoor unit that works according to the current schedule.
Note: schedule of Centralized Controller can add UNI SPLIT units. For a
same indoor unit, different schedules can be set at the same time. In this
case, unit will work according to the schedule setting that is previously
energized.
Figure 5-9 Page of Schedule Editing
Centralized Controller