Sinclair SCC-36 User Manual page 11

Figure 3-11 Installation Holes of the Electric Box Rear Cover
fig.3–9 is a simple installation procedure of centralized controller. Please pay
attention to the following matters:
(1) Before installation, first cut off the power supply of indoor unit. The power
must be cut off during the whole installation process.
(2) During the installation, be careful not to damage to touch screen.
(3) Before installation, please make the following preparations:
1) In case that the centralized controller is installed on wall, dig a hole that is
the size of 180mm×107mm×62mm and peg 4 wooden or plastic plugs on
the wall according to fig.3–10.
2) In case that the centralized controller is installed inside the control
cabinet, dig 4 installation holes on the surface of the control cabinet
according to fig.3–11.
Figure 3-10 Diagram of Wooden or Plastic Plug
Centralized Controller