Quantum ATL StackLink Installation Instructions Manual page 28

Quantum|ATL StackLink™ Installation Instructions
Document 6421009-03, Ver. 3, Rel. 0
November 2001
28
Press the or
5 Up Down
Press .
6 Select
The program starts. The program moves the data cartridge
Demo 5
randomly between levels until you stop the program. It is
recommended that you allow the program to run for five times the
number of levels in the library; for example, a ten level stack
should be run for at least 50 cycles.
Ensure that all levels are accessed by observing the cartridges
7
moving from level to level. If not, re-check the interlibrary cabling.
When the program has run successfully for the recommended
8
number of cycles, press
The GUI stops when the current cycle is completed.
The StackLink installation is now complete.
Completing the Installation
buttons to select
Demo 5
to end the program.
Stop
.