Testing The Library Robotics - Quantum ATL StackLink Installation Instructions Manual

Testing the Library
Robotics
Figure 22 Menu Screen
Figure 23 Demo Programs
Screen
To complete the installation, run the
0
StackLink robotics are working correctly:
Select a library module on which to initiate the test.
1
Load a single data cartridge into the left magazine of the selected
2
M1500 module.
Leave all other slots in the M1500 stack empty.
On the GUI main screen of the selected M1500 module, press
3
The GUI displays the
Press
4 Demo
The GUI displays the
Completing the Installation
Quantum|ATL StackLink™ Installation Instructions
screen (see
Menu
.
Demo Programs
Document 6421009-03, Ver. 3, Rel. 0
program to verify that the
Demo 5
figure 22).
screen (see figure
November 2001
.
Menu
23).
27