Ethernet Interface; Fig. 7-7: Ethernet Interface - Bosch Rexroth IndraControl VPP 21.1 Series Project Planning Manual

7-6
VPP 21 Box

Ethernet Interface

Ethernet – Network Connection The VPP 21 can be connected with Ethernet networks via the interfaces
Eth.1 and Eth.2.
RJ45 female connector, 8-pin
Type:
Cable length:
Cable type:
Transmission rate:
Ethernet RJ45
8
1

Fig. 7-7: Ethernet interface

The driver configuration of the network connection can be called up in the
task bar or in the "Control Panel" with icon "Network Board". Here you can
set among other values, if the data transfer shall occur with 10 Mbits/s
and/or with 100 Mbits/s.
Note: Please observe that the network board of the outstation has to
be able to process the same data transmission rate.
Ethernet 10Base T / 100Base X
Max. 100 m
Shielded, 2-core, twisted
10 or 100 Mbits/s
Ethernet
max. 100 m
1
2
3
4
5
6
7
8
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
VPP 21.1
To the network
ethernet_sst.cdr9