Operator Terminals With Keypad; Navigation Keys; Fig. 6-1: Key Blocks Of The Device Variant Vpp 21.1 Bq - Bosch Rexroth IndraControl VPP 21.1 Series Project Planning Manual

6-2
Display and Operating Components
6.2

Operator Terminals with Keypad

Navigation Keys

The operator terminals VPP 21.1 BQ are equipped with a keypad (IP 64)
with 57 keys.
Furthermore, three pushbuttons (START, STOP, E-STOP) are integrated
in the front panel top right as well as three navigation keys are integrated
in the handle bar on the left and the right of the display.
Navigation keys
Function key blocks
Key blocks "Operation"
Special
Key
keys
mouse
Fig. 6-1: Key blocks of the device variant VPP 21.1 BQ
Three navigation keys without designation are arranged in the two handle
bars on the right and the left of the display. The function of the keys can
be specified by application programs.
Each of the two middle keys controls one digital output. All navigation
keys generate MF2 codes (see Fig. 6.9).
Key block "Machine"
Cursor
Numeric block
keys
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
VPP 21.1
Vpp21_bq_Tasten.fh9