Fig. 6-10: Connections Of E-Stop, Start, Stop; Fig. 6-11: Wiring Of E-Stop, Start, Stop - Bosch Rexroth IndraControl VPP 21.1 Series Project Planning Manual

The operator terminals vpp 21 are pc-based machine operator terminals
Table of Contents

Advertisement

6-10
Display and Operating Components
START, STOP, E-STOP
The contacts of the E-STOP pushbutton and the keys START and STOP
(S64 to S66) are supplied to a connector strip. This connector strip is
situated at the upper edge on the rear side of the VPP 21 under the left
door.
Connector strip
Fig. 6-10:
Connections of E-STOP, START, STOP
This connections are available for user-specific wirings according to the
following connection diagram:
Fig. 6-11:
Wiring of E-STOP, START, STOP
Note:
The maximum load for each contact must not exceed
1 ampere.
12
11
10
9
8
7
6
5
4
3
2
1
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
VPP 21.1
Steckerleiste.fh9
StartStopAnschluss.fh7

Advertisement

Table of Contents
loading

Table of Contents