8-4
Maintenance and Installation
Fire, explosion or burns by wrong battery
treatment!
The battery must not be charged, opened, heated
⇒
over 100 °C and burn.
DANGER
1. Shut down the PC.
2. Disconnect the power supply.
3. Open the left door on the rear side of the VPP 21.
Fig. 8-1:
The battery is situated behind the left door.
4. Plug off the connector, with which the battery is connected.
5. Remove the battery fixed by a Velcro strip. Dispose it immediately
and properly and observe the notes given in this chapter.
6. Fix the new battery. Consider that the inserted battery type is
designed for the VPP 21 and permitted by Bosch Rexroth. At present,
this type is: Lithium battery 3.0 V; 2.3 Ah with Bosch Rexroth part
number: 1070.922.650.
7. Plug in the connector.
8. Close the door of the VPP 21.
Note:
Dispose the used battery immediately. Keep it away from
children.
VPP 21.1
Batterie.JPG
DOK-SUPPL*-VPP*21.1***-PR02-EN-P