Interfaces; Overview - Bosch Rexroth IndraControl VPP 21.1 Series Project Planning Manual

VPP 21.1
7.3

Interfaces

Overview

Des. on Type of connection
the
housing
E MS PS/2 mouse
E KB PS/2 Keyboard/Mouse
E VGA VGA connection of an external CRT monitor
E Eth.1, Eth.2 Network connection:
Ethernet 10Base T / 100Base X
E COM Serial interface:
RS232 (UART 16550), not assigned
E USB USB interface, type 1
E CF Slot for Compact-Flash card as boot medium
E Slot for 2.5" hard disk
E X10 24 VDC, digital outputs, ready contact
E Field bus
Connection VPP 21 box
point:
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
Note: Malfunctions
Use only shielded cables and metallic/conductive connector or
coupling covers with large-area screen contact.
Type of connector
(integrated)
Mini-DIN PS/2 female
connector, 6-pin
Mini-DIN PS/2 female
connector, 6-pin
VGA HD female connector,
15-pin
RJ45 female connector, 8-pin
D-Sub male connector, 9-pin
USB female connector, 4-pin,
type A
Weidmüller male connector
terminal, MSTB 1.5, 8-pin
D-Sub male connector, 9-pin
Fig. 7-4: Connector type VPP 21
Furthermore, a reset button (Res.) is provided.
Note: The contacts for E-STOP as well as the START and STOP
pushbutton are described on page 6-10.
caused by insufficient
Mating connector or cable
(from outside)
Mini-DIN PS/2 male connector,
6-pin
Mini-DIN PS/2 male connector,
6-pin
VGA HD male connector, 15-pin
RJ45 male connector
(twisted pair, 8-core)
D-Sub female connector, 9-pin
USB male connector, 4-pin
Female connector terminal,
MSTB 1.5, 8-pin
D-Sub female connector, 9-pin
7-3
VPP 21 Box
shielding!