Operating System; Bios Settings; Commissioning - Bosch Rexroth IndraControl VPP 21.1 Series Project Planning Manual

The operator terminals vpp 21 are pc-based machine operator terminals
Table of Contents

Advertisement

1-4
System Presentation
1.3

Operating System

1.4

BIOS Settings

1.5

Commissioning

For license reasons the operator terminals VPP 21 are only delivered with
already installed operating system. At present, Windows XP is used.
The delivered operating systems may only be used in the industrial
environment. Use in the office area, e. g. on a secretary's computer, is not
allowed.
When leaving the factory, the BIOS settings have been made according
to the respective device variant.
Mount the device properly (for this, see section 5.2 "Installation"). Then,
connect the device to the power supply ( 24 V) and, if required, to the
network.
VPP 21.1
DOK-SUPPL*-VPP*21.1***-PR02-EN-P

Advertisement

Table of Contents
loading

Table of Contents