Fig. 6-15: Dialog Window To Set The Touch Screen - Bosch Rexroth IndraControl VPP 21.1 Series Project Planning Manual

VPP 21.1
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
A dialog window appears for the different settings:
Fig. 6-15: Dialog window to set the touch screen
For further information please select the Help button on the respective
tab.
Via "Start -> Programs -> UPDD" you reach further useful programs, if
required.
The program Calibrate might be of special interest. If required, you can
calibrate the touch mouse with the help of this program. For this, touch,
one after the other, the middle of the four crosses displayed on the
screen.
For further information on this programs refer to the online help, which
you can start directly
D:\Programs\UPDD\.
Display and Operating Components
as file GENER-EN.CHM
6-13
UPDD_settings.bmp
in folder