Table of Contents
Advertisement
16/49
Interfaces
Loss of UL/CSA conformity due to modifications at the device.
UL and CSA marking applies only to the device upon delivery. After
modifying the device, verify the UL and the CSA conformity.
9 Interfaces
Fig. 9-1: Interfaces of the built-in devices (for names, refer to the following table)
9.1 Overview
Name at the
Connection type
housing
① XD1
24 V DC voltage supply
② XF20
Gigabit Ethernet interface
③ XF21
Gigabit Ethernet interface
④ XBAT
Battery connection
⑤ XG10
CFAST slot
⑥ XF30
USB 2.0 interface
⑦ XF31
USB 3.0 interface
⑧ PE
Functional earth connection
Tab. 9-1: Interfaces
NOTICE
Use only shielded cables and metallic or conductive connector/coupling covers
with large-area shield support.
9.2 24 V DC voltage supply
The 24 V power supply is connected to the XD1 connection.
Bosch Rexroth AG R911403058_Edition 01
IndraControl VEP 30.6, VEP 40.6,
2
3
4 5 6
7 8
1
Connector type, inte-
grated
3-pin, MC1,5/3- G-3,5
THT
RJ45 socket
RJ45 socket
Molex Micro-Fit 3 mm
CFAST socket
USB socket,
4-pin, type A
USB socket,
9-pin, type A
M5 screw
Malfunctions due to insufficient shielding!
VEP 50.6 Embedded Terminals
Mating connector or ca-
ble (from outside)
3-pin, FK-MCP 1,5/3-
ST-3,5
RJ45 plug
RJ45 plug
Molex 43645-0200
(or compatible)
CFAST card
USB plug,
4-pin, type A
USB plug,
9-pin, type A
Advertisement
Table of Contents
