Features Sender Unit Layout Sender Unit Descriptions Receiver Unit Layout Receiver Unit Descriptions Connecting the HDKVM ELR extension for HDMI and USB Over One CAT5 Wiring Diagram DIP Switch Confi guration 10 Network Cable Wiring Diagram 11 Rack Tray Installation 12 Specifi...
HDTV systems of all sizes with hard-working solutions that are easy to install and simple to operate. The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 The HDKVM ELR extends HDMI, KVM (keyboard, video, and mouse), and USB over a distance up to 330 feet (100 meters) using one CAT-5e cable.
Electromagnetic Interference (EMI), cell phones and A/C motors. • The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 features the ability to generate compatible EDID and Hot Plug signals when working with different brands of source devices and monitors.
• Rack-mountable Package Includes (1) HDKVM ELR extension for HDMI and USB Over One CAT5 - Sender Unit (1) HDKVM ELR extension for HDMI and USB Over One CAT5 - Receiver Unit (1) 6 ft. Locking HDMI Cable (M-M) (1) 6 ft. USB cable (A-B)
SENDER UNIT DESCRIPTIONS Power Indicator This LED indicator will glow bright blue once the included 5V DC locking power supply has been properly connected to the unit and the AC power cord has been plugged into an available electrical outlet. Link Indicator This LED indicator will fl...
RECEIVER UNIT DESCRIPTIONS Power Indicator This LED indicator will glow bright blue once the included 5V DC locking power supply has been properly connected to the unit and the AC power cord has been plugged into an available electrical outlet. Link Indicator This LED indicator will fl...
CONNECTING THE HDKVM ELR EXTENSION FOR HDMI AND USB OVER ONE CAT5 How to Connect the HDKVM ELR extension for HDMI and USB Over One CAT5 Using the included locking HDMI cable, connect the computer (Hi-Def source) to the HDMI In port on the Sender unit. Connect another locking HDMI cable from the HDMI Out port on the Receiver unit to the HDTV dislay.
DIP SWITCH CONFIGURATION Receiver Unit The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 contains DIP switches on the bottom of the Receiver unit (the Sender unit does not contain any DIP switches). Each DIP switch performs a different function.
1 2 3 4 5 6 7 8 Brown Cat-5, Cat-5e, and Cat-6 cabling comes in stranded and solid core types. Gefen recommends using solid core cabling. It is recommended to use one continuous run from one end to the other. In some...
RACK TRAY INSTALLATION Turn unit upside down. Remove rubber feet. Line up holes on unit and rack tray. Install countersink screws . Ensure the unit is installed securely. Unit has been installed into rack tray.
SPECIFICATIONS Maximum Pixel Clock................225 MHz Video Input Connector (Sender)....HDMI Type A, 19-pin, female locking Video Output Connector (Receiver)....HDMI Type A, 19-pin, female locking USB Connector (Sender)............(1) Type B, female USB Connector (Receiver)............(3) Type A, female Link Connector (Sender / Receiver)..........RJ-45, shielded Service Connector for fi...
Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notifi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...
Page 19
Rev A1 This product uses UL or CE listed power supplies.
Need help?
Do you have a question about the HDKVM ELR extension for HDMI and USB Over One CAT5 and is the answer not in the manual?
Questions and answers