Sender Unit Descriptions - Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 Manual

1 Power Indicator
This LED indicator will glow bright blue once the included 5V DC locking power
supply has been properly connected to the unit and the AC power cord has
been plugged into an available electrical outlet.
2 Link Indicator
This LED indicator will fl ash bright blue on and off until the Sender and Receiver
unit are connected using a CAT-5e cable.
3 USB Indicator
This LED indicator will glow bright blue when a USB source is connected.
4 Video Indicator
This LED will glow bright blue when the HDMI source is connected.
5 Link
Connects the Sender to the Receiver unit using a CAT-5e cable
6 Service
Mini-USB service port used for upgrading the fi rmware
7 Locking Connector
Used to lock the HDMI cable in place
8 HDMI In
Connect a Hi-Def source to this port using the included locking HDMI cable.
Please see the Features section on page 3 for HDMI Features Supported.
9 USB In
Connect the USB source to this port using the supplied USB cable.
10 5V DC
Connect the included 5V DC locking power supply to this connector.

SENDER UNIT DESCRIPTIONS

5