Introduction - Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 Manual

INTRODUCTION

Congratulations on your purchase of the Gefen HDKVM Extender for HDMI and
USB over One CAT-5. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen's reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to install and simple to operate.
The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5
The HDKVM ELR extends HDMI, KVM (keyboard, video, and mouse), and USB
over a distance up to 330 feet (100 meters) using one CAT-5e cable.
Hi-Def resolutions up to 1920 x 1200 and USB 2.0 are supported. The Receiver
unit connects to an HDTV display using HDMI and also allows the connection of
up to three USB devices, providing access to printers, scanners, cameras,
external storage media, Digital Signage, and automated control systems.
This product uses Gefen ELR (Extra Long Range) Technology based on
HDBaseT®, allowing HDMI and USB signals to travel along the same CAT-5e
cable, reducing cabling costs in addition to providing easier and more reliable
installation.
How It Works
Place the HDKVM ELR Sender unit next to the computer source and use the
included locking HDMI cable to connect the computer to the Sender unit. Use the
supplied USB cable to connect the USB host (source) device to the USB port on
the Sender unit. Connect the Receiver unit to an HDTV display with another
locking HDMI cable. Connect the USB devices to the Receiver unit. Use one
CAT-5e cable, up to 330 feet (100 meter), to connect the Sender unit to the
Receiver unit. Connect the included locking power supplies to the Sender and
Receiver units and plug both power cords into available electrical outlets.
1