HDKVM ELR EXTENSION FOR HDMI AND USB OVER ONE CAT5
How to Connect the HDKVM ELR extension for HDMI and
1.
Using the included locking HDMI cable, connect the computer
(Hi-Def source) to the HDMI In port on the Sender unit. Connect another
locking HDMI cable from the HDMI Out port on the Receiver unit to the HDTV
dislay.
2.
Connect the included USB cable from the computer (Hi-Def source) to the
USB In port on the Sender unit.
3.
Up to three USB devices can be connected to the USB outputs on the
Receiver unit.
4.
Connect a CAT-5e cable from the Link jack on the Sender unit to the Link
jack on the Receiver unit up to 330 feet (100 meters) away.
NOTE: If terminating network cables in the fi eld, please adhere to
the TIA/EIA568B specifi cation (see page 11).
5.
Connect the included 5V DC locking power supplies to the Sender and
Receiver unit and plug the AC power cords into available electrical outlets.
The Power LED's (on both the Sender and Receiver units) will turn on,
indicating that both units are powered.
6.
The Link LED indicators will fl ash until a link has been established.
Hi-Def Source
with USB
IMPORTANT: This product cannot be disposed of in the general
trash. Please contact your solid waste local authority.
CONNECTING THE
USB Over One CAT5
Receiver
Receiver
Sender
USB HD
HD Display
8
CAT5 CABLE
HDMI CABLE
USB
USB Mouse
USB Keyboard
EXT-HDKVM-ELR
Need help?
Do you have a question about the HDKVM ELR extension for HDMI and USB Over One CAT5 and is the answer not in the manual?