1
Power Indicator
This LED indicator will glow bright blue once the included 5V DC locking power
supply has been properly connected to the unit and the AC power cord has
been plugged into an available electrical outlet.
2
Link Indicator
This LED indicator will fl ash bright blue on and off until the Sender and Receiver
unit are connected using a CAT-5e cable.
3
USB Indicator
This LED will fl ash bright blue on and off until the Sender and Receiver unit are
connected using a CAT-5e cable. The USB source must be connected to the
Sender unit.
4
Video Indicator
This LED will fl ash bright blue on and off until the Sender and Receiver unit are
connected using a CAT-5e cable. The Hi-Def source must be connected to the
Sender unit.
5
Link
Connects the Receiver to the Sender unit using a CAT-5e cable.
6
Locking Connector
Used to lock the HDMI cable in place
7
HDMI Out
Connect an HDTV display to this HDMI port.
8
Service
Mini-USB service port used for upgrading the fi rmware
9
USB
Connects up to three USB devices (i.e mouse, keyboard, camera)
10 5V DC
Connect the included 5V DC locking power supply to this connector.
RECEIVER UNIT DESCRIPTIONS
7
Need help?
Do you have a question about the HDKVM ELR extension for HDMI and USB Over One CAT5 and is the answer not in the manual?