Table of Contents
Advertisement
The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 contains
DIP switches on the bottom of the Receiver unit (the Sender unit does not
contain any DIP switches). Each DIP switch performs a different function.
Two DIP switches located on
the bottom of the Receiver
Unit.
DIP Switch 1 - EDID Management
•
OFF - Local EDID
When Local EDID mode is used, the EDID will be assembled by copying all
video and audio features of the connected output device.
•
ON (default) - Pass Through EDID
Allows all video and audio features of the connected devices to be passed
to the source device. By default, the unit is shipped with DIP 1 in the ON
position.
DIP Switch 2 - FOR FUTURE USE
DIP SWITCH CONFIGURATION
Receiver Unit
9
Advertisement
Table of Contents
Need help?
Do you have a question about the HDKVM ELR extension for HDMI and USB Over One CAT5 and is the answer not in the manual?