Table of Contents
Advertisement
4.5
Configuration software installation procedure
4.5.1
Installation checklist
Building Technologies
Fire Safety & Security Products
The following two checklists tell you what you need for MT8001 configuration soft-
ware installation, and the steps you go through to install it. Items appearing in grey
are not covered in this manual.
The following abbreviations are used in the checklists:
− DMS-CG – DMS Network, Fire & Intrusion Connectivity Guide
(document n.A6V10062425))
− CTM – Composer Technical Manual (document n.A6V10062401)
− PAK – Product authorisation key
®
Microsoft ActiveSync
ActiveSync cable (either purchased in kit, or built as shown in Appendix A)
Installation CD (includes Composer, MT8001 Firmware, and Plug-ins)
Hardware key (dongle) for Composer
PAK for Composer
Composer Technical Manual
DMS8000 Network, Fire & Intrusion Connectivity Guide
1.
Install the ActiveSync utility
2.
Install Composer
3.
Install the plug-ins
4.
Attach and activate the hardware key
5.
Set up a new project
Create a new project
–
Define the general structure of the project tree, taking into account the
–
goal of presenting a structure to the final user that is clear and familiar to
him/her (if not using a template)
Items needed for Installation
utility
Installation Procedure
048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc
Installing the MT8001
p. 26
p. 26
p. 27
CTM
DMS-CG
DMS-CG
25
06.2009
Advertisement
Table of Contents
