Table of Contents
Advertisement
Building Technologies
Fire Safety & Security Products
MT8001 Approvals 1 tab
User confirmation required
Intrusion Options – Confirmation of discon-
nected objects
Display confirmation message
EN54 – Filters management
Return to Event List timeout (sec)
To configure Duress Alarm, do the following:
1. Check the Duress Alarm transmission to enable a Duress Alarm on the
MT8001.
2. Modify the Duress events suppression time, if desired.
3. Drag and drop the appropriate node from the Composer tree to the Approvals-1
tab window (see Fig. 38).
Note: Typically, the node will be a point on an intrusion panel.
4. In the Drop Point dialog box, do the following:
a. Choose a property from the Property drop-down list.
b. Choose a command from the Command drop-down list.
c. Change the timeout (command feedback), if desired.
5. Select Add.
Note: To update the list in the Drag and Drop window, select the node, and then
select Change or Remove.
Configuration options
Enable user confirmation dialog box
Enable confirmation message dialog box
Time before the Event List display returns to the
filter for the most severe open event category.
Default: 20 seconds
048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc
Configuring the MT8001
39
06.2009
Advertisement
Table of Contents
