Configuring The Project Tree - Siemens MT8001 MP4.20 Installation Function & Configuration Commissioning Safety Regulations

Configuring the MT8001
5.2.2

Configuring the project tree

32
Building Technologies
Fire Safety & Security Products
The Composer tool enables you to define your system in a tree-based structure, in
which you add and link together the MT8001 management terminal, the control
units and the network devices that are required.
Adding the MT8001 terminal
In new projects, you need to add the MT8001 terminal unit. Create a new folder,
which you can name e.g. Management Terminal, select it, and click the MT8001
icon on the Composer toolbar (see Fig. 30).
If you miss the MT8001 icon in the toolbar, check the plug-in installation in 4.5.4
at p.27.
Fig. 30 Adding the MT8001 in a new project structure
Adding subsystems and network components
You can now define the structure of your system (see an example in Fig. 6). For
more information, please refer to DMS8000 Network and Subsystems Connectivity
configuration guide; see Documentation resource information on page 5.
If you miss the MT8001 project structure, check the Active-Sync installation in
4.5.2 at p.26.
Fig. 31 An MT8001 project structure
048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc
06.2009