Wall And Desk Mounting (Mh8051) - Siemens MT8001 MP4.20 Installation Function & Configuration Commissioning Safety Regulations

4.2.2

Wall and desk mounting (MH8051)

Building Technologies
Fire Safety & Security Products
The desk mounting housing (S24230-C119-A2) fulfils the following customer re-
quirements:
• Control desk applications
• Wall-mounted applications (angled view)
To access the device:
1. Release the screws on the left and right of the frame-facing.
2. Raise the frame vertically and tilt forward.
3. Press the angle-supports lightly inwards and unhook the frame to remove the
frame from the base of the housing.
4. Release the 4 mounting bolts.
Installation procedure for wall or desk mounting:
1. Mount the tamper contact if required (S24230-A135-A1).
2. Screw the base of the housing to the wall or onto the control desk.
3. Install the MT8001 in the frame, taking note of the required text orientation.
4. Re-mount the frame in the housing.
5. Make all necessary external connections.
6. Return frame back to the vertical and lower onto the housing base, and tighten
the screws on the left and right of the frame (fix with lacquer if required).
Fig. 5 Desktop, surface mounting
Fig. 7 Desktop – recessed mounting
Fig. 6 Desktop – surface mounting
048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc
Installing the MT8001
13
06.2009