YASKAWA FSDrive-MV1S Instructions Manual page 97

Multi-function Analog Input Functions
Setting
Value
00
01
02
05
06
07
09
0A
0F
10
11
12
13
14
15
1F
Note Set to 0F when the analog input is used for the built-in PLC or not used as multi-function contact input.
-32
5
Function
Auxiliary frequency reference (Can be set
only for H3-09)
Frequency gain
Frequency bias
Accel/decel time changes (reduction
coefficient)
DC injection braking current
Overtorque detection level
Frequency reference lower limit level
Jump frequency
Not used (Set when the terminal is used
for the built-in PLC or not used)
Positive torque limit
Negative torque limit
Regenerative torque limit
Torque reference at torque control/Torque
limit at speed control
Torque compensation
Positive/negative torque limit
(For H3-09 and H3-13) Analog input not
used
(For H3-05) Frequency reference
Contents (100%)
Maximum number of rotations
Frequency reference command value
Maximum number of rotations
Set acceleration and deceleration times
Inverter rated current
Motor rated torque
Maximum number of rotations
Maximum number of rotations
−
Motor rated torque
Motor rated torque
Motor rated torque
Motor rated torque
Motor rated torque
Motor rated torque
−
Maximum number of rotations
Control Methods
Open-
Flux
loop
Vector
Vector
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
No Yes
Yes Yes
Yes Yes