Reference Constants: D - YASKAWA FSDrive-MV1S Instructions Manual

Reference Constants: d

The following settings are made with the reference constants (d constants): Frequency references.
Preset Reference: d1
User constants for frequency references are shown in the following table.
Constant
Number
d1-01
d1-02
d1-03
d1-04
d1-05
d1-06
d1-07
d1-08
d1-17
-18
5
Name
Description
Display
Frequency reference 1 Sets the frequency reference in
the units used in o1-03.
Reference 1
Frequency reference 2 The frequency reference when
multi-step speed reference 1 is
Reference 2
on for a multi-function input.
Frequency reference 3 The frequency reference when
multi-step speed reference 2 is
Reference 3
on for a multi-function input.
Frequency reference 4 The frequency reference when
multi-step speed references 1
and 2 are on for multi-function
Reference 4
inputs.
Frequency reference 5 The frequency when multi-step
speed reference 3 is on for a
Reference 5
multi-function input.
Frequency reference 6 The frequency reference when
multi-step speed references 1
and 3 are on for multi-function
Reference 6
inputs.
Frequency reference 7 The frequency reference when
multi-step speed references 2
and 3 are on for multi-function
Reference 7
inputs.
Frequency reference 8 The frequency reference when
multi-step speed references 1,
2, and 3 are on for multi-func-
Reference 8
tion inputs.
Jog frequency The frequency reference when
reference the jog frequency reference
selection, FJOG command, or
Jog Reference
RJOG command is on.
Change
Setting Factory
during
Open-
Range Setting
Operation
loop
Vector
0.00 to
0.00% Yes
100.00
0.00 to
0.00% Yes
110.00
0.00 to
0.00% Yes
110.00
0.00 to
0.00% Yes
110.00
0.00 to
0.00% Yes
110.00
0.00 to
0.00% Yes
110.00
0.00 to
0.00% Yes
110.00
0.00 to
0.00% Yes
110.00
0.00 to
10.00% Yes
100.00
Control
Methods
MEMOBUS
Register
Flux
Vector
Q Q 2C0H
Q Q 2C1H
Q Q 2C2H
Q Q 2C3H
Q Q 2C4H
Q Q 2C5H
Q Q 2C6H
Q Q 2C7H
Q Q 2D0H