YASKAWA FSDrive-MV1S Instructions Manual page 176

Constant
Number
H4-08
H4-09
H4-10
H4-11
H4-12
H4-13
-52
6
Name
Description
Display
Gain (terminal AO3) Sets the multi-function analog
output 3 voltage level gain.
Sets whether the monitor item
output will be output in multi-
ples of 10 V.
Term AO3 Gain
The maximum output from the
terminal is 10 V. A meter cali-
bration function is available.
Bias (terminal AO3) Sets the multi-function analog
output 3 voltage level bias.
Sets output characteristic up/
down parallel movement as a
percentage of 10 V.
Term AO3 Bias
The maximum output from the
terminal is 10 V. A meter cali-
bration function is available.
Monitor selection
Sets the number of the monitor
(terminal AO4)
item to be output (U1-
from terminal A04.
Term AO4 Signal
Gain (terminal AO4) Sets the multi-function analog
output 4 voltage level gain.
Sets whether the monitor item
output will be output in multi-
ples of 10 V.
Term AO4 Gain
The maximum output from the
terminal is 10 V. A meter cali-
bration function is available.
Bias (terminal AO4) Sets the multi-function analog
output 4 voltage level bias.
Sets output characteristic up/
down parallel movement as a
percentage of 10 V.
Term AO4 Bias
The maximum output from the
terminal is 10 V. A meter cali-
bration function is available.
Analog output signal
0: 0 to +10 V
level selection
1: -10 to +10 V
Signal Select
Change
Setting Factory
during
Range Setting
Operation
0 to
1.00 Yes
30.00
-100.0
to 0.0% Yes
100.0
) 0 to 99 9 Yes
0 to
1.00 Yes
30.00
-100.0
to 0.0% Yes
100.0
0 or 1 1 No
Control
Methods
MEMOBUS
Open-
Register
Flux
loop
Vector
Vector
A A 477H
A A 478H
A A 479H
A A 47AH
A A 47BH
A A 47CH