Spare Parts - YASKAWA FSDrive-MV1S Instructions Manual

Spare Parts

Considering the importance of the system in which the FSDrive-MV1S series Inverter is used, it is recom-
mended that spare parts be prepared in advance for all possible measures for maintenance management. Table
8.4 lists the recommended spare parts. Confirm the following items and contact your Yaskawa representative
when ordering the spare parts.
FSDrive-MV1S: Model, capacity, and Yaskawa order number
Spare parts: Part name, model and quantity
1) Related to Boards
Part Name
Cell control board (CCB)
CPU board
Modulator board
Current detection
resistance board
Controller
Optical fiber inter-
face board
Isolation board
RS232/RS485 converter board
5-V power supply board
±15-V power supply
24-V power supply
2) Related to Main Circuit
Power cell
3) Operation Circuit
Molded-case circuit breaker
Contactor
Thermal relay
4) Others
Digital operator
Optical fiber cable
Cooling fan for panel
EWS cable (3 m)
Table 8.4 List of Recommended Spare Parts
Model
−
Refer to Table 8.6.
JEBC-61301-INV Control board to be mounted on the modulator board
JEBC-61302-INV Medium voltage Inverter control module
JEBC-61902-x x depends on the Inverter capacity. Refer to Table 8.5.
JEBC-61601 Used only for 6 kV class Inverter
Input/Output voltage detection analog insulation
JEBC-61701
board.
RS485/RS232 converter board mounted on the digital
JEBC-61602
operator panel
JEBC-61901 5-V three-phase outputs
−
MMB50A-6-CN (COSEL)
− R10A-24-CN (COSEL)
−
Refer to Table 8.6.
−
−
−
JVOP-160
WRMZ-1295
EF-45ETB or -50FTB (manufactured by Mitsubishi
−
Electric Corporation)
JZCP-751904
Maintenance and Inspection
Remarks
9
8-