Firmware Update - Ingeteam INGECON SUN STORAGE 1Play Installation And Configuration Manual

Ingeteam
This contactor is managed by a digital output from the ISS 1Play so that the contactor is closed
in the event of disconnection from the public grid and open once the grid is connected.
To configure the digital output, go to Display:
Menu > Configuration > Digital I/O > Digital Output 1 > Neutral to ground
Confirm by clicking on "OK" and save the changes.
6. Maximum Injection Power to Grid
This parameter permits the injection of excess PV power from the ISS 1Play to the network.
To change this parameter, enter via Display:
Menu > Configuration > Operation Mode > Grid Injection Power
Enter the required value and confirm by clicking on "OK" and save the changes.

3.4 Firmware update

The firmware for the INGECON SUN STORAGE 1Play should be updated to the latest version
available on the website: www.ingeteam.com.
ABH2013IQM05_A.docx
Installation and configuration of a self consumption system managed by
INGECON SUN STORAGE 1Play
21