L972/L982 Tool Measurement - Siemens SINUMERIK 840 User Manual

4 Measuring Cycles for Turning Machines

4.1 L972/L982 Tool measurement

4.1 L972/L982 Tool measurement
Tool cycles with the following functions are available for tool measurement:
• L972 – Calibrate tool probe
– Measure tool of L1 or L2 with tool types 1 ... 10, 26, 28,
31 ... 38 with one tool offset number
– Automatic tool measurement of L1 and/or L2 with tool types
1 ... 10, 26, 28, 31 ... 38 with one tool offset number
• L982 – All functions of L972
– Automatic tool measurement of L1 and/or L2 and R with tool types 28, 37, 38
with one or two tool offset numbers.
Selection: Length and/or radius compensation
Cycle L982 needs approx. 45 % more memory space than L972 and its running time is
approx. 20 % slower.
The 3rd and 4th decimal place of R23 are additionally used for coding the measurement
variant of L982.
R23 = 4 3 2 1
0
1
2
0
1
2
With Version 3.2 and higher cycle L972 is available in two versions:
• L972-1 – Calibrate tool probe
– Tool measurement of L1 or L2 with tool types 1 ... 8,
PF-PF (basic function) also automatically
• L972-2 – Calibrate tool probe
– Tool measurement of L1 or L2 with tool types 1 ... 10
– also PF-SF; SF-SF for tool types 1 ... 8 also automatically
– mirrored measurement
– SF-SF for type 9 only
Cycle L982 is also available in two versions with Version 3.2 and higher:
• L982-1 – Tool measurement type 30-39 (basic functions)
• L982-2 – Tool measurement type 20-39 and mirrored measuring.
The version that you require must be loaded in the part program memory and/or linked into the
user memory submodule.
4–2
Measurement also automatically of L1and/or L2
with tool types 1 ... 10, 26, 28, 31 ... 38 with
one tool offset number
Measurement also automatically of L1 and/or L2
and R with tool types 28, 37, 38 with
one tool offset number
Measurement also automatically of L1 and/or L2
and R with tool types 28, 37, 38 with
two tool offset numbers
Compensate length and radius
Compensate length only
Compensate radius only
©
Siemens AG 1990 All Rights Reserved
Possible with:
– L972/L982
– L982 only
– L982 only
if 3rd decimal – L982 only
place of R23=1 – L982 only
or 2 – L982 only
6FC5197- AB70
SINUMERIK 840/850/880 (BN)
08.96