Measurement Variants For Milling Machines And Machining Centres - Siemens SINUMERIK 840 User Manual

1 Introduction
1.2.1 Measurement variants for turning machines
-
2 point measurement on
diameter outside
Result:
Actual dimension (diameter)
deviation,
tool offset
Fig. 1.3 Workpiece measurement without calibration
1.2.2 Measurement variants for milling machines and machining
centres
Calibrate tool probe
Calibrating tool
Result:
Probe switching point referred to
machine zero point
Fig. 1.4 Tool measurement
1–4
-
2 point measurement on
diameter inside
Result:
Actual dimension (diameter)
deviation,
tool offset
Measure tool
Result:
Tool length,
tool diameter
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
07.90
6FC5197- AB70