Required Documents; Required Tools, Measurement And Auxiliary Devices - Siemens ARCOSKOP Troubleshooting Manual

Prerequisites

Required documents

•
ARCOSKOP circuit diagram
•
Circuit diagram for monitor X2080 (if present)
•
ARCOSKOP System Manual
•
For the laser targeting device option, if
present:

Required tools, measurement and auxiliary devices

NOTE
•
Digital multimeter
•
Oscilloscope > 50 MHz
•
Dose measuring device
•
Protective ground tester
•
Service PC with WINDOWS 95 operating system *
•
Service software (see ARCOSKOP System Manual) *
•
Connection cable "Service-PC - ARCOSKOP" (e.g. part no. 99 00 440)
•
1 set of resolution tests
•
1 set of radiation filters
•
Centering cross
•
Heat conducting paste WPS
•
Standard service equipment *
•
1 set of Allen keys *
•
A 30 mm socket key (is required for adjusting the brake) *
•
200 N spring scale
•
Torque wrench 20 Nm to 100 Nm (e.g. part no. 80 86 159)
•
Torque wrench 3 Nm to 20 Nm
Siemens AG
Medical Solutions
All tools, measurement and auxiliary devices with the exception
of those marked "*", are listed along with their specifications in
the STC (Service Tools Catalogue).
(e.g. "Fluke 8060 A", part no. 97 02 101)
(e.g. "Fluke Combi Scope PM 3390 A",
part no. 99 00 861)
(e.g. "PTW-DIADOS", part no. 97 17 612)
(e.g. "Safety Tester Bender UNIMET 1000 ST",
part no. 51 38 727)
(e.g. part no. 28 71 820)
(e.g. part no. 97 98 596)
(e.g. part no. 96 60 051)
(e.g. part no. 20 48 650)
(e.g. part no. 44 15 113)
(e.g. part no. 34 24 553)
SPR2-250.840.01
Rev. 01
Setting Instructions / Laser targeting
device RXR2-130.032.01...
Seite 1 von 16
09.05 CS PS 24
1 - 1
1
1
1
ARCOSKOP
System Manual