Measuring Cycles For Turning Machines - Siemens SINUMERIK 840 User Manual

10.91
4

Measuring Cycles for Turning Machines

The possible scope of measurement depends on the
(See machine tool manufacturer's specifications)
Cycle Function
L931 Auxiliary cycle for tool or workpiece measuring cycles
L932 Check MDC and transfer parameters
L933 Auxiliary cycle for tool or workpiece measuring cycles
L934 Auxiliary cycle for tool or workpiece measuring cycles
L935 Measurement result display selection
L936 Measurement abort
L937 Auxiliary cycle for workpiece measuring cycles
L938 Auxiliary cycle for tool or workpiece measuring cycles
L939 Auxiliary cycle for tool measuring cycles
L961 Additive input of empirical values
L962 Erase program EV/AV
L964 Auxiliary cycle for tool measuring cycle L973
L965 Measuring plane (tool or workpiece measurement)
L966 Auxiliary program for operator guidance macro
L967 Presetting of transfer parameters
L970 Prepositioning
L971 Auxiliary cycle for tool measurement
L972 Tool measurement
L973 Calibrate workpiece probe
L974 Workpiece measurement
L982 Tool measurement
L988 Auxiliary cycle for workpiece measuring cycles
These programs must be available.
Additional programs: facilitate programming and operating.
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
machine configuration and can also be
determined partly via MDC.
6FC5197- AB70
4 Measuring Cycles for Turning Machines
See Section 3
for auxiliary cycles
Tool measuring cycle
Workpiece measuring
cycles
4–1