Lists; Overview Of Transfer Parameters - Siemens SINUMERIK 840 User Manual

01.93
10

Lists

10.1

Overview of transfer parameters

Parameter definition
Parameter must be defined.
Parameter is not set in the cycle for the measurement
variant selected.
Definition of parameter depends on the measurement variant
or machine configuration.
Whether or not the parameter must be defined is
(See machine tool manufacturer's specifications)
Tool measurement / Workpiece measurement
L970
Variant
Tool measurement
R Param.
R23
R25
R30
R32
D
D = Diameter value, in the case of axis diameter programming.
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
determined via an MDC.
Possible axes
Abscissa / Ordinate / Applicate
Vorpositionieren bei
0
Variable measuring speed
(if 0 rapid traverse/reduced rapid traverse)
Axis number of plane
Approach position
6FC5197- AB70
10.1 Overview of transfer parameters
Workpiece measurement
1
10 Lists
10–1