Lists - Siemens SINUMERIK 840 User Manual

9 Alarms
9.3 Alarm description
4025
Tool tip position wrong
Explanation:
X
Remedy:
X
4026
Toolnose location 9 defined
Explanation: Tool point direction 9 cannot be measured with measurement variant
"Automatic measuring" (R23 > 1).
Remedy: Use measurement variant 1.
9–10
The tool is to be measured in the X axis. The cycle
wants to position the Z axis, but this would result in a
collision with the measuring cube.
CP
Probe cube
Tool cutting edge incorrectly positioned
Position tool in X axis before cycle call with greater
positive value.
CP
Tool cutting edge
Probe cube
Tool cutting edge correctly positioned
©
Siemens AG 1990 All Rights Reserved
01.93
Tool cutting edge
Z
Z
6FC5197- AB70
SINUMERIK 840/850/880 (BN)