Festo CPX Series Electronic Manual page 83

3. Overview and connecting technology I/O modules
Festo P.BE−CPX−EA−EN en 0405b
Sub−base CPX−AB−4−M12−8POL
Please note
In order that the completely fitted modules with sub−base
CPX−AB−4−M12−8POL comply with protection class
IP65/IP67:
Use cable type KM12−8GD8GS−2−PU from Festo for con
·
necting cylinder−valve combination type DNCV or other
sensors or actuators (see appendix A.9).
Tighten the union nuts of the plugs at first by hand.
·
Seal unused sockets with protective caps type ISK−M12
·
(accessories).
Screening plate type CPX−AB−S−4−12
Sub−base CPX−AB−4−M12−8POL can be combined with a
screening plate.
Depending on what you have ordered, this may already be
fitted onto the sub−base.
Instructions on mounting the screening plate at a later stage
can be found in section 3.3.2.
Instructions on using the screening plates can be found with
sub−base CPX−AB−4−M12x2−5POL.
3−17