Huawei Telecom Power TP48120A-HD15A1 User Manual page 37

TP48120A-HD15A1, TP48120A-HD15A2,
TP48200A-HD15A1, and TP48200A-HD15A2 Telecom
Power
User Manual
(4) Cancel button
(7) Up button
Table 3-3 Indicator description
Name Color
Run indicator Green
Alarm indicator Red
Table 3-4 Button description
Button Name
Up
Down
Back
Confirm
NOTE

The LCD screen becomes dark if no button is pressed within 30 seconds.
 You need to log in again if no button is pressed within 1 minute. The preset password is 000001.
 When setting parameter values, you can hold down
 The LCD screen luminance increases or decreases if you hold down
more than 2 seconds.
 The SMU is reset if you hold down
Issue 03 (2020-01-04)
Status
Off
Blinking at 0.5
Hz
Blinking at 4 Hz
Off
Steady on
Description
Turns to the previous menu or sets parameter values.
When setting parameter values, you can hold down
Turns to the next menu or sets parameter values.
When setting parameter values, you can hold down
Returns to the previous menu without saving the settings.
 Enters the main menu from the standby screen.
 Enters a submenu from the main menu.
 Saves the menu settings.
and simultaneously for more than 10 seconds.
Copyright © Huawei Technologies Co., Ltd.
(5) Down button
Description
The SMU06C is faulty or has no DC input.
The SMU06C is running properly and communicating
with the host properly.
The SMU06C is running properly but is not
communicating with the host properly.
No critical or major alarm is generated.
A critical or major alarm is generated.
or to quickly adjust values.
and or
3 Components
(6) Enter button
to quickly adjust values.
to quickly adjust values.
and simultaneously for
30