TP48120A-HD15A1, TP48120A-HD15A2,
TP48200A-HD15A1, and TP48200A-HD15A2 Telecom
Power
User Manual
Using Ladders
When climbing a ladder, take the following precautions to reduce risks and ensure safety:
Issue 03 (2020-01-04)
Do not drag steel ropes and hoisting tools or bump hoisted objects against hard objects
during hoisting.
Use wooden or fiberglass ladders when you need to perform live working at heights.
When a step ladder is used, ensure that the pull ropes are secured and the ladder is held
firm.
Before using a ladder, check that it is intact and confirm its load bearing capacity. Do not
overload it.
Ensure that the wider end of the ladder is at the bottom, or protective measures have
been taken at the bottom to prevent the ladder from sliding.
Ensure that the ladder is securely positioned. The recommended angle for a ladder
against the floor is 75 degrees, as shown in the following figure. An angle rule can be
used to measure the angle.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
9
Need help?
Do you have a question about the Telecom Power TP48120A-HD15A1 and is the answer not in the manual?
Questions and answers