Table of Contents
Advertisement
7. Attach the Lower Shield Cover (32) to the Left
and Right Shields (27, 28) with two M4 x 16mm
Screws (93).
8. Identify the Right Pedal Leg (18).
Attach a Pedal (19) to the Right Pedal Leg (18)
with four M6 x 12mm Screws (92); start all the
Screws, and then tighten them.
Repeat this step to attach the other Pedal
(not shown) to the Left Pedal Leg (not
shown).
7
93
8
18
19
9
27
32
28
93
92
92
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HIIT TRAINER LITE 5.9 and is the answer not in the manual?
Questions and answers
We purchased the elliptical used, it was working fine when picked it up. However once we got it home and placed in it's new home it isn't working properly. Rge display does not light up and there is a rythmic thumping beat noise that stops when the elliptical is turned off. It was not dropped or did not recieve any blows. We had it tied down securely
The display not lighting up and a rhythmic thumping noise in the Pro-Form HIIT Trainer Lite 5.9 after moving it could be caused by the following:
1. Power Connection Issue: Ensure the trainer is properly connected to a power source. Check the power adapter and its connection to the trainer.
2. Loose or Misaligned Components: Moving the trainer may have caused parts to become loose or misaligned. Inspect and tighten all parts, as recommended in the manual.
3. Drive Belt Adjustment: If the rhythmic thumping noise persists, it may be due to the drive belts being improperly adjusted. Follow the instructions to adjust the drive belts and ensure they are correctly tensioned.
4. Internal Damage: Movement may have caused internal components to shift or get damaged, potentially affecting the console and other parts. If the issue persists after inspection and adjustment, consult the manufacturer or a professional technician.
This answer is automatically generated