Disassembly - Taylor C043 Operating Instructions Manual

Disassembly

Step 1
Remove the door assembly.
Figure 89
Step 2
Disassemble the door assembly. Remove the gasket
from the product door.
Figure 90
Step 3
Remove the front bearing from the door or beater
shaft.
Model C043
Step 4
While removing the beater shaft, take each blade
and leaf spring off and place them in a container for
cleaning.
Step 5
Remove the rear seal from the beater shaft. Use a
single-use towel to remove the lubricant from the
seal before taking it to the sink for cleaning.
35
Figure 91
Figure 92
Figure 93
Operating Procedures