Unpacking And Checking; Unpacking; Checking On Receipt; Instrument Serial Number - Ametek Land 4200 User Manual

User Guide
1

Unpacking and Checking

1.1 Unpacking

Check all packages for external signs of damage. Check the contents against the
packing note and identify them against the System Summary.
IMPORTANT
If any item has been damaged in transit this should be reported to the
carrier and to the supplier immediately. DO NOT RETURN a damaged
instrument to the sender as the carrier will not then consider a claim.
Save the packing with the damaged article for inspection by the carrier.

1.2 Checking on Receipt

All equipment is thoroughly inspected before dispatch and no further checking
should be required on receipt before installation.

1.3 Instrument Serial Number

The instrument serial number is recorded on a label on the instrument as shown
below. It is recommended that the serial number and part number are recorded
for future reference:
When in communication with Land Instruments International Service department
it will save any confusion and expedite matters if these numbers are quoted.
Serial Number
Fig. 1-1 Model 4200 Dust & Opacity Monitor
Model 4200 Dust & Opacity Monitor
Page 1