Chapter 2 - Installing And Connecting The Switch; Installation (19 Rackmount & Desktop Version); Installation In A 19-Inch Rack / Cabinet - Intellinet 560559 User Manual

Chapter 2 - Installing and Connecting the Switch

This part describes how to install this Switch and make connections to it. Please read
the following topics and perform the procedures in the order being presented.
2.1 Installation (19 Rackmount & Desktop version)
Please follow these instructions to avoid incorrect installation, cause device damage
or security threats.
➢ Put the Switch on stable place or desktop to prevent damage from falling.
➢ Make sure the Switch works in the proper AC input range and matches the
voltage labeled on the Switch.
➢ To prevent electrical shocks, do not open the Switch's housing, even in power
failure or if disconnected from a power source.
➢ Make sure that there is proper heat dissipation from and adequate ventilation
around the Switch.
➢ Make sure the cabinet can hold the weight of the Switch and its accessories.
2.1.1

Installation in a 19-inch Rack / Cabinet

The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be
placed in a wiring closet with other equipment. To install the Switch, follow these
steps:
a. Attach the mounting brackets on the Switch's side panels (one on each side)
and secure them with the screws provided.
b. Use the screws provided with the equipment rack to mount the Switch on the
rack and tighten it.
Web Smart Managed PoE Switches User Manual
Bracket Installation
9