Bypass Settings; Alarm + Bypass; Arming Settings - HDL Buspro -MSM.431 User Manual

User Manual
SB-DN-SEC250K
When reach the end time point, it will trigger the 'OFF' window's targets, e.g. turn off lights
in the morning.

5.7 Bypass Settings

5.7.1 Alarm + Bypass

Authorize the sensor here(need to set the security module's ID in the sensor also), when
the status of it has changed under arming mode, it will send out commands to the security
module, then the security module will trigger corresponding targets to protect the system.
(for details of these settings, please check the '6. Application' below)

5.7.2 Arming Settings

Authorize some user interfaces to arm and disarm the system, e.g. DLP, TouchLife, iLife,
iRidium and so on. iLife(IOS) has the fixed ID, 3/254, and the iRidium's fixed ID is
253/254.
Advanced Security Controller – User Manual
14