Table of Contents
Advertisement
User Manual
SB-DN-MAC01.331
5.2: Connector info
6. Operation
6.1: commissioning
Method One:
1. Run the HDL-BUS Pro Setup tool.
2. Long press the "programming button" and keep pressing it for 3 seconds until it turns to
a red color.
3. On the software, click the "Address management", and select
"Modify address (when device button is pressed)" option, it will show a window like
below:
4. click on "Indicate initial address", then it will show the current subnet/device ID of this
device. to modify the address, fill in the new address, and click the "Modify initial
address "Click the "+Add" button, the device will be added to "ON-line devices "list.
Method two:
1- Run HDL-bus pro tool
2- Search for the online devices by clicking on search button and the device will be
showed on "online device list"
6.2: software configurations
Normally we need to use a HDL panel with air-conditioning function to control this module,
which means in this manual both the configuration of HDL HVAC module and DLP
air-condition function will be covered.
6.2.1 Basic settings
This tab displays the basic information of this device.
AC controller – User Manual
4
Advertisement
Table of Contents
