User Manual
SB-DN-SEC250K
f) Also users can enable the 'Bypass' function of channel 1, then the sensor will not
detect this channel status when trying to arm. This is very useful when you need to walk
out through one door after arm from the DLP Panel inside the room.
6.3 Vacation Settings
1. Before leave for vacation, press the 'vacation mode' button, turn off AC and light, the
music player will play a voice hint. After 20s (Exit Delay), the security module starts to arm
the house.
a) Set 20s for Exit Delay
b) Turn off channel 1 of relay(Subnet/Device ID is 1/5) and AC which is controlled by
HDL-MPL8.48(Subnet/Device ID is 1/8) in 'EXIT BUZZER ON' window (user can set any
targets they need, then when press arm button, it will trigger these targets)
Advanced Security Controller – User Manual
30