HDL Buspro -MSM.431 User Manual page 36

Advanced security controller
Table of Contents

Advertisement

User Manual
SB-DN-SEC250K
time reaches 7:00, it will turn off it.
d) Enable index 2, set the 'Start Time' is 20:00, and the 'End Time' is 23:00, follow above
settings to turn on lights at 20:00, turn off at 23:00 in the evening.
3. When there is someone opening the door, then 8in1 sensor's detected status will
change(no movement -> movement, dry contact: connected ->disconnected), it will report
to the security module, then security module will trigger to the Z-Audio to play 'welcome
home' voice hint.
a) Make sure there is one voice hint for come back in special folder of SD Card. Here it is
'003Come in'
Advanced Security Controller – User Manual
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Buspro sb-dn-sec250k

Table of Contents