User Manual
SB-DN-SEC250K
5.5 Alarm Commands
It's mainly for setting the alarm targets for different alarm modes(exceed Entry Delay). Fire,
gas, etc alarm have no delay, will come into effect immediately.
Each mode can control up to 32 targets.
5.6 Vacation Settings
It's mainly for setting some targets in the vacation mode, so it could simulate scenarios,
such as turn on/off lights by timer function in the house to give the illegal invaders a
warning that somebody is at home.
Can set the control targets in 'ON' and 'OFF' windows independently.
When reach the start time point, it will trigger the ' ON' window's targets, e.g. turn on lights
at night.
Advanced Security Controller – User Manual
13