Arming Settings - HDL Buspro -MSM.431 User Manual

5.4 Arming Settings

Area No.
Select one area, area No. is from 1 to 8.
Trigger when leaving
If enable the selection, it will trigger the targets when arming button is pressed; if do not
enable the selection, it will trigger the targets after the Exit Delay time.
Arming Modes
There are 6 arming modes can be set respectively, they are: VACATION ARM
AWAYARM N IGHT ARM
、
control up to 32 targets.
Auto arming and disarming
1- Auto Arming
If the conditions are met(enable auto arming and within the set time), then it will
automatically work under the arming mode
2- Auto Disarming
If the conditions are met (enable auto disarming and within the set time), it will
automatically disarm
Advanced Security Controller – User Manual
N IGHT_G ARM D AY ARM
、 、
SB-DN-SEC250K
D ISARM ARM. Each mode can
、
User Manual
、
12